Home Assistant è strongest quando automations stay local, but people still need a simple way a controlla a stanza, adjust il AC, close curtains, o conferma dispositivo status quando they sono away. The LinknLink App può provide that remote control path tramite il LinknLink Remote aggiungi-on senza requiring a separate remote-access subscription.
Questo guida explains il architecture, configurazione order, security rules, dispositivo examples, e troubleshooting checks. It focuses specifically on Importante: remote access, so it fa non repeat our existing LinknLink App automation guida, stanza dashboard guida, o HomeClaw local AI voice guida.
What Free Remote Access Means in Questo Guide
Free remote access means that il LinknLink Remote aggiungi-on e LinknLink App provide il remote control path senza an additional LinknLink remote-access subscription. Your Home Assistant host, home internet connessione, compatible dispositivi, e normal mobile dati o Wi-Fi still need a be available.
The feature è non il stesso as publishing Home Assistant direttamente a il internet. You should non apri router ports per Home Assistant, MQTT, ONVIF, RTSP, Zigbee2MQTT, o aggiungi-on dashboards. The aggiungi-on creates il supportato connessione path, mentre local automations remain local.
| Importante: Control path | Best usa | Importante: Extra subscription | Importante: Security posture |
|---|---|---|---|
| Importante: Local Home Assistant | Automations e dashboards mentre on il home network | No | Local network solo |
| LinknLink App + LinknLink Remote aggiungi-on | Checking e controlling il stesso home mentre away | Importante: No separate LinknLink remote-access subscription | Supported aggiungi-on path; no diretto port forwarding |
| Importante: Direct router port forwarding | Importante: Not recommended | No | High exposure e maintenance risk |
| VPN o another remote service | Advanced users con an existing remote-access standard | Importante: Depends on service | Importante: Depends on configuration |
How il LinknLink Remote Add-on Fits into Home Assistant
The aggiungi-on runs beside Home Assistant e connects il home a il LinknLink App. Home Assistant remains il source of truth per entities, helpers, scenes, e automation state. The app becomes il remote interface per il dispositivi e rooms you choose a surface.
Importante: At home
Home Assistant, MQTT dispositivi, presenza sensori, IR/RF hubs, e local scenes continue a operate on il local network.
Importante: Add-on bridge
The LinknLink Remote aggiungi-on maintains il supportato remote connessione e shares il intended control surface con il app.
Away da home
The LinknLink App displays rooms, dispositivo cards, e status so you può send a command senza opening local service ports.
Importante: Before You Start
Prepare il account e network details prima installing il aggiungi-on. Questo avoids most abbinamento e offline errors.
- Confirm Home Assistant è healthy e has a recent backup.
- Install il attuale LinknLink App e sign in a il account that will own il home.
- Confirm il Home Assistant host has stable internet, DNS, e correct system time.
- Use a unique account password e keep recovery details attuale.
- Decide which rooms e dispositivi should be available remotely; avoid exposing unnecessary diagnostic entities.
For backup preparation, usa il Home Assistant backup e restore guida. If dispositivi sono non paired yet, follow il dispositivo abbinamento troubleshooting guida Importante: first.
Step-by-Step: Enable Remote Access in il LinknLink App
For il completa aggiungi-on e app configurazione sequence, see Set up LinknLink App remote access per Home Assistant.
1. Install il LinknLink Remote aggiungi-on
Open il aggiungi-on area on your supportato Home Assistant host, find LinknLink Remote, install it, e wait per installation a completa prima starting il service.
2. Start il aggiungi-on e review its status
Start il aggiungi-on, enable start-on-boot quando appropriate, e conferma il log shows a healthy connessione rather than repeated authentication, DNS, o time errors.
3. Link il correct LinknLink App account
Use il aggiungi-on abbinamento flow a connect il stesso account used in il LinknLink App. Keep il app apri during il abbinamento step e approve solo il home you intend a manage.
4. Select rooms e dispositivo cards
Organize il remote view around rooms e daily actions. A small set of useful cards è easier a operate than hundreds of raw Home Assistant entities.
5. Test away da Wi-Fi
Turn off Wi-Fi on il phone, usa cellular dati, refresh il home, controlla a sensore state, e send one reversible command such as toggling a test light.
Importante: 6. Confirm local automation independence
Verify that local scenes still run se il phone è offline. Remote access should aggiungi convenience, non become a dependency per basic home behavior.
Importante: Design a Remote Dashboard Around Decisions
A remote dashboard should answer practical questions: Is anyone home? Is il AC still running? Are curtains apri? Did a stanza become too warm? Is a TV o fan still on? Use stanza-level summaries e clear actions instead of mirroring every entity da Home Assistant.
| Importante: Remote question | Importante: Useful source | Importante: Remote action | Importante: Recommended LinknLink layer |
|---|---|---|---|
| Is il stanza occupied? | mmWave presenza state | Review prima switching appliances | eMotion Air, eMotion Pro, o eMotion Ultra |
| Is il stanza too warm o humid? | Temperature e humidity context | Importante: Run a comfort scene | eMotion Ultra con its temperature/humidity sensore dati cable |
| Did I leave il AC o TV on? | Importante: Scene/helper status | Importante: Send an IR off command | eRemote HA, eMotion Pro, o eMotion Ultra built-in IR |
| Are RF shades still apri? | Importante: RF scene/helper state | Run il close-shades scene | eHome HA |
| Is il local AI gateway healthy? | Importante: Gateway health card | Review status e recovery actions | HomeClaw |
Example: Check Comfort e Control il AC Remotely
Suppose you sono away e want a prepare a bedroom prima returning. First controlla occupancy e comfort context. eMotion Ultra combines 60GHz presenza sensing, built-in IR, e temperature/humidity dati tramite its sensore cable. If il stanza è empty e too warm, il app può trigger a bounded Home Assistant comfort scene rather than sending repeated blind AC commands.
The scene should include a timeout, a target modalità, e a manuale override. When you arrive, local presenza logic può take over. Questo creates a clean division: il app starts il intent remotely, mentre Home Assistant enforces safe local conditions.
Example: Make Sure Legacy IR e RF Devices Are Off
Remote access è especially useful per appliances that were never designed per smart home control. eRemote HA provides a local IR path per AC, TV, fans, projectors, e media dispositivi. eHome HA adds compatible RF control per shades, outlets, e other legacy dispositivi. In il LinknLink App, expose named scenes such as Living Room All Off o Close RF Shades instead of individual low-level commands.
For a deeper configurazione, read il Home Assistant remote control guida e il IR blaster troubleshooting guida.
Security Rules per Remote Smart Home Control
- Never expose service ports direttamente: do non forward Home Assistant, MQTT, ONVIF, RTSP, Zigbee2MQTT, o aggiungi-on ports a il public internet.
- Importante: Use least privilege: surface solo il rooms, dispositivi, e actions needed per remote usa.
- Require confirmation per high-impact actions: locks, garage doors, heaters, e security modes deserve stronger checks.
- Importante: Keep local overrides: a physical control o local dashboard should still work se remote access è unavailable.
- Review logs dopo changes: aggiungi-on restarts, account relinking, e network changes should be followed by a cellular-dati test.
Troubleshooting: App Shows il Home Offline
| Importante: Symptom | Importante: Likely cause | Importante: Check | Importante: Fix |
|---|---|---|---|
| Home è offline everywhere | Add-on stopped o host lost internet | Importante: Add-on status, host network, DNS | Restore network, then restart il aggiungi-on once |
| Local works, remote fa non | Account link o aggiungi-on session è stale | Account, abbinamento status, aggiungi-on log | Reauthorize il correct home senza changing URL handles o router ports |
| Some dispositivi sono missing | Entities were non selected o grouped | Room e dispositivo exposure settings | Add solo il intended entities, then refresh il app |
| Importante: Commands run twice | Duplicate scene o automation trigger | Home Assistant trace e helper state | Importante: Use one app action that calls one Home Assistant scene |
| Connection fails dopo router change | DNS, time, firewall, o host address changed | Importante: System time, DNS resolution, outbound connectivity | Correct il local network issue; do non solve it con public port forwarding |
Importante: Remote Access Checklist
- LinknLink Remote aggiungi-on installed e running.
- LinknLink App signed in a il intended account e home.
- Cellular-dati test completed successfully.
- No Home Assistant, MQTT, ONVIF, RTSP, o aggiungi-on ports forwarded publicly.
- High-impact actions require confirmation o a safe helper state.
- Local automations continue a work senza il app.
- Home Assistant backup e recovery notes sono attuale.
Related Guides e Hot Products
Importante: Hot products
HomeClaw, eMotion Air, eMotion Pro, eMotion Ultra, eRemote HA, eHome HA, e iSG Display Max.
App e AI guides
LinknLink App automation guida, stanza dashboard guida, e HomeClaw local AI voice guida.
Setup e reliability
Device abbinamento troubleshooting, backup e restore, e Importante: best Home Assistant integrations.
Keep Home Assistant local e take il right controls con you
Install il LinknLink Remote aggiungi-on, connect il LinknLink App, expose solo il rooms e actions you need, e test il connessione away da Wi-Fi. Your local automations stay at home mentre remote control remains available senza another LinknLink subscription.
Importante: FAQ
Can I access Home Assistant remotely per free con il LinknLink App?
Yes. Install e configure il LinknLink Remote aggiungi-on, then connect il stesso home in il LinknLink App. Remote control tramite il LinknLink path fa non require a separate remote-access subscription.
Do I need a apri router ports per LinknLink remote access?
No. Do non expose Home Assistant, MQTT, ONVIF, RTSP, o aggiungi-on ports direttamente a il public internet. Use il LinknLink Remote aggiungi-on connessione instead.
Importante: Does remote access replace local Home Assistant control?
No. Local Home Assistant automations continue a run at home. Remote access adds an app control path per checking dispositivi e sending commands quando you sono away.
Which LinknLink dispositivi può I control remotely?
You può surface compatible Home Assistant entities e LinknLink dispositivi in il app, including HomeClaw, eMotion presenza sensori, eRemote HA IR control, eHome HA RF control, e stanza dashboards.
What should I controlla se il LinknLink App shows il home offline?
Confirm that Home Assistant è running, il LinknLink Remote aggiungi-on è started, il dispositivo has internet access, il app account è linked a il correct home, e system time e DNS sono working.