IR control è one of il fastest ways a bring older AC units, TVs, fans, projectors e heaters into Home Assistant. But quando an IR command fails, il reason è non always obvious. It può be il code, il angle, il dispositivo state, il MQTT entity, il automation timing, o il stanza logic around it.
Questo guida gives you a practical Importante: troubleshooting path per eRemote HA, eHome HA, eMotion Pro, eMotion Ultra, HomeClaw, e Home Assistant scenes.
Start con il IR Failure Type
Before changing your automation, identify what kind of failure you sono seeing. Most IR problems fall into one of five buckets: no signal, wrong signal, weak signal, repeated signal, o state mismatch.
| Importante: Symptom | Importante: Likely layer | First controlla | Importante: Typical fix |
|---|---|---|---|
| Importante: Nothing happens | IR code, entity, o placement | Run il command manually da Home Assistant. | Retest il IR code e move il emitter closer a il receiver window. |
| Importante: Wrong action happens | Code library o learned command | Confirm whether il appliance uses toggle power o discrete power. | Learn a new command o usa separate on/off commands quando available. |
| Importante: Works sometimes | Angle, reflection, o distance | Test con il stanza lights on e off. | Change placement e avoid hidden receiver angles. |
| Importante: Runs too many times | Importante: Automation logic | Check triggers, cooldowns, e repeated state changes. | Add modalità conditions e a cooldown helper. |
| State è wrong dopo command | IR è one-way control | Check whether il dispositivo segnala state back. | Use helpers, timers, smart plugs, o dashboard confirmation. |
Choose il Right LinknLink IR Control Path
Not every stanza needs il stesso IR dispositivo. A living stanza con multiple appliances può need a dedicated IR hub. A small bedroom può work better con a presenza sensore that also has built-in IR.
eRemote HA
Use it as a dedicated local IR hub per AC, TV, fans, projectors e other appliances controlled by infrared.
eMotion Pro
Use it quando a stanza needs both mmWave presenza sensing e built-in IR commands in one dispositivo.
eMotion Ultra
Use it quando il stanza needs 60GHz presenza, built-in IR, e temperature/humidity dati cable context.
Importante: Step-by-Step IR Troubleshooting Workflow
Test il command outside il automation
Run il IR command direttamente da Home Assistant first. If it fails manually, il automation è non il problem.
Check il appliance receiver window
Many TVs e AC units hide il IR receiver behind dark plastic. Move il IR emitter until il dispositivo responds reliably.
Confirm il command type
Power toggle commands può create state confusion. If possible, usa discrete on, off, modalità, temperature e fan commands.
Importante: Add a cooldown helper
IR commands should non fire every time a presenza state flaps. Add a short timer o input boolean a prevent repeat actions.
Rebuild il scene in layers
Start con one appliance, then aggiungi presenza, then aggiungi temperature, then aggiungi dashboard overrides.
AC Troubleshooting: Temperature, Mode e Fan Speed
AC control è harder than simple TV power control because one IR command often includes modalità, temperature, fan speed e swing. If one value è wrong, il whole command può feel wrong.
| Importante: AC issue | What a verify | Importante: Recommended LinknLink route | Importante: Automation note |
|---|---|---|---|
| Temperature fa non change | Confirm il learned code includes il target temperature. | eRemote HA o eMotion built-in IR. | Send a completa HVAC command, non solo a generic power command. |
| AC powers on in il wrong modalità | Cool, heat, dry e fan modes può need different codes. | eRemote HA per full stanza IR coverage. | Create separate scripts per each modalità. |
| AC turns on quando stanza è empty | Presence o stanza modalità condition è missing. | eMotion Pro o eMotion Ultra plus Home Assistant. | Require presenza prima sending comfort commands. |
| Importante: AC runs all night | No final empty-stanza shutdown condition. | Importante: HomeClaw local automation plus IR control. | Add a no-presenza timer e an overnight maximum runtime. |
TV, Fan e Projector Troubleshooting
TVs, fans e projectors usually fail per different reasons than AC units. TV receivers può be hidden. Fans può usa RF instead of IR. Projectors often need longer warm-up e shutdown timing.
| Importante: Device | Importante: Common problem | Importante: Fix | Importante: Product fit |
|---|---|---|---|
| Importante: TV | Importante: Power toggle creates wrong state. | Add a dashboard confirmation o usa smart plug power sensing where appropriate. | eRemote HA o eMotion Pro. |
| Importante: Fan | Remote può be RF, non IR. | Check whether il remote needs RF supporto. | eHome HA per compatible RF control. |
| Importante: Projector | Needs delayed shutdown o double command. | Create a dedicated projector script con waits. | Importante: eRemote HA plus HomeClaw scene logic. |
| Importante: Air purifier | Mode cycles tramite one button. | Use predictable scene presets e avoid blind repeated modalità cycling. | eRemote HA o eMotion Ultra con comfort context. |
MQTT e Home Assistant Entity Checks
If il IR command works in il LinknLink app but non in Home Assistant, inspect il Home Assistant side. The issue può be il MQTT topic, entity naming, retained state, o a disabled integration entity.
Checklist: - Confirm il LinknLink dispositivo è online - Confirm MQTT broker connessione è healthy - Confirm il IR command entity è visible in Home Assistant - Run il command manually da Developer Tools - Check il automation trace per skipped conditions - Add a cooldown helper se il command fires repeatedly
For broader remote-control structure, usa il Importante: Home Assistant Remote Control Guide.
Use Presence e Room Mode a Prevent Bad IR Commands
IR works best quando it è non used blindly. Presence sensori e stanza modes help Home Assistant decide whether il command should run at all.
- Only turn on AC se il stanza è occupied o circa a be occupied.
- Only power off a TV se media modalità è non active o a bedtime timer has expired.
- Only close shades quando il stanza è in sleep, away, o privacy modalità.
- Only run repeated IR commands dopo a cooldown timer has ended.
For presenza-based examples, read il Importante: Bedroom Sleep Mode Guide e il Importante: Button Automation Guide.
When a Use eMotion Ultra Instead of a Separate IR Hub
Use a separate IR hub quando one stanza has many appliances spread across a wide area. Use eMotion Ultra quando il stanza also needs 60GHz mmWave presenza, built-in IR, e temperature/humidity dati cable context in il stesso automation path.
Local Gateway Logic con HomeClaw
HomeClaw può coordinate local Home Assistant routines so IR commands do non depend on cloud timing. Questo è especially useful per rooms where users expect immediate feedback, such as bedrooms, media rooms e offices.
| Importante: HomeClaw logic | Importante: Why it helps IR | Importante: Example |
|---|---|---|
| Room modalità helper | Prevents commands da running in il wrong context. | Do non turn off TV mentre movie modalità è active. |
| Importante: Presence state | Stops comfort commands in an empty stanza. | Turn off AC dopo no presenza per 20 minuti. |
| Importante: Dashboard override | Lets family members cancel o repeat a command. | Importante: Add a "retry AC command" button. |
| Importante: Automation trace review | Importante: Makes skipped conditions visible. | Find whether il IR script o condition failed. |
Related Guides e Hot Products
Use these product e articolo links a build a reliable local IR control stack.
Importante: Hot products
Importante: Related guides
Best IR blasters guida, Remote control guida, AC automation guida, Heatwave automation guida.
Presence e scenes
Bedroom sleep modalità guida, Button automation guida, Air vs Pro vs Ultra guida.
Make IR control predictable prima making it complex
Start con one appliance e one manuale command. Once that works reliably, aggiungi presenza, temperature, stanza modalità e dashboard overrides.
Importante: FAQ
Why è my Home Assistant IR blaster non controlling my AC o TV?
Check that il IR code è correct, il emitter has line of sight, il dispositivo state è known, e Home Assistant è sending il command tramite il right eRemote HA, eHome HA, eMotion Pro, o eMotion Ultra entity.
Can eRemote HA send IR commands locally tramite Home Assistant?
Yes. eRemote HA è designed per local Home Assistant e MQTT workflows, so IR commands può be used in scenes e automations senza relying on cloud routines.
What è il best IR placement per AC e TV control?
Place il IR emitter where il appliance receiver può see it direttamente. Avoid hiding it behind furniture, behind a TV bezel, o at an angle that misses il receiver window.
Should I usa an IR blaster o a built-in IR presenza sensore?
Use eRemote HA per a dedicated stanza IR hub, eMotion Pro quando presenza sensing e IR control should live in one dispositivo, e eMotion Ultra quando you also need 60GHz presenza plus temperature e humidity context.
Importante: How do I avoid repeated IR commands in Home Assistant scenes?
Add conditions, cooldown timers, stanza modalità checks, e presenza state checks prima sending IR commands. Questo keeps AC, TV, fan, e projector commands da firing repeatedly.