1. Importante: App Setup: Adding o Device, Connecting Wi-Fi, e Updating Firmware
First, you'll need para get o dispositivo connected para your network e ensure it's running o latest firmware using o LinknLink app.
- Add o Device: Open o LinknLink app e tap o "+" icon ou "Add Device" button on o main screen. Select o correct dispositivo category (e.g., "Sensor") de o list.
- Connect para Wi-Fi: Follow o on-screen instructions para put your sensor into emparelhamento modo. Once detected, o app will prompt you para selecione your 2.4GHz Wi-Fi network e entrar o password para connect o dispositivo para your home network.
- Importante: Update Firmware: After o dispositivo é successfully added, verifique its settings page. If a new firmware version é available, you will see a notification. It é highly recommended para update para o latest version para o best performance e new features.
2. Sub-dispositivos: Configuring Presence, Light, e Temp/Humidity Sensors
Once o eMotion Sensor é set up, you pode configure its individual components. On o dispositivo's main page in o app, you will see o different sub-dispositivos listed. Tap on each one para access its specific settings e view its real-time readings. You pode customize parameters para o Presence Sensor, Light Sensor, e Temp/Humidity Sensor para suit your needs
3. MQTT Integration: Connecting Locally para Home Assistant
For advanced users who want para integrate o sensor com Home Assistant para local control, o LinknLink app offers a simple MQTT integration. Navigate para o dispositivo's advanced settings ou a "Developer Mode" section. There, you will find a toggle para "Enable MQTT." Once enabled, you pode entrar your MQTT broker's details para establish a local ligação, allowing Home Assistant para discover e communicate com o sensor diretamente.
