Home Assistant is strongest wanneer automations stay local, but people still need a simple way naar controleer a ruimte, adjust de AC, close curtains, of bevestig apparaat status wanneer they zijn away. The LinknLink App kan provide that remote control path via de LinknLink Remote voeg toe-on zonder requiring a separate remote-access subscription.
Dit gids explains de architecture, instellen order, security rules, apparaat examples, en troubleshooting checks. It focuses specifically on Belangrijk: remote access, so it doet niet repeat our existing LinknLink App automation gids, ruimte dashboard gids, of HomeClaw local AI voice gids.
What Free Remote Access Means in Dit Guide
Free remote access means that de LinknLink Remote voeg toe-on en LinknLink App provide de remote control path zonder an additional LinknLink remote-access subscription. Your Home Assistant host, home internet verbinding, compatible apparaten, en normal mobile gegevens of Wi-Fi still need naar be available.
The feature is niet de zelfde as publishing Home Assistant rechtstreeks naar de internet. You should niet open router ports voor Home Assistant, MQTT, ONVIF, RTSP, Zigbee2MQTT, of voeg toe-on dashboards. The voeg toe-on creates de ondersteund verbinding path, terwijl local automations remain local.
| Belangrijk: Control path | Best gebruik | Belangrijk: Extra subscription | Belangrijk: Security posture |
|---|---|---|---|
| Belangrijk: Local Home Assistant | Automations en dashboards terwijl on de home network | Nee | Local network alleen |
| LinknLink App + LinknLink Remote voeg toe-on | Checking en controlling de zelfde home terwijl away | Belangrijk: No separate LinknLink remote-access subscription | Supported voeg toe-on path; nee directe port forwarding |
| Belangrijk: Direct router port forwarding | Belangrijk: Not recommended | Nee | High exposure en maintenance risk |
| VPN of another remote service | Advanced users met an existing remote-access standard | Belangrijk: Depends on service | Belangrijk: Depends on configuration |
How de LinknLink Remote Add-on Fits into Home Assistant
The voeg toe-on runs beside Home Assistant en connects de home naar de LinknLink App. Home Assistant remains de source of truth voor entities, helpers, scenes, en automation state. The app becomes de remote interface voor de apparaten en rooms you choose naar surface.
Belangrijk: At home
Home Assistant, MQTT apparaten, aanwezigheid sensoren, IR/RF hubs, en local scenes continue naar operate on de local network.
Belangrijk: Add-on bridge
The LinknLink Remote voeg toe-on maintains de ondersteund remote verbinding en shares de intended control surface met de app.
Away van home
The LinknLink App displays rooms, apparaat cards, en status so you kan send a command zonder opening local service ports.
Belangrijk: Before You Start
Prepare de account en network details voor installing de voeg toe-on. Dit avoids most koppelen en offline errors.
- Confirm Home Assistant is healthy en has a recent backup.
- Install de huidige LinknLink App en sign in naar de account that will own de home.
- Confirm de Home Assistant host has stable internet, DNS, en correct system time.
- Use a unique account password en keep recovery details huidige.
- Decide which rooms en apparaten should be available remotely; avoid exposing unnecessary diagnostic entities.
For backup preparation, gebruik de Home Assistant backup en restore gids. If apparaten zijn niet paired yet, follow de apparaat koppelen troubleshooting gids Belangrijk: first.
Step-by-Step: Enable Remote Access in de LinknLink App
For de voltooi voeg toe-on en app instellen sequence, see Set up LinknLink App remote access voor Home Assistant.
1. Install de LinknLink Remote voeg toe-on
Open de voeg toe-on gebied on your ondersteund Home Assistant host, find LinknLink Remote, install it, en wait voor installation naar voltooi voor starting de service.
2. Start de voeg toe-on en review its status
Start de voeg toe-on, enable start-on-boot wanneer appropriate, en bevestig de log shows a healthy verbinding rather than repeated authentication, DNS, of time errors.
3. Link de correct LinknLink App account
Use de voeg toe-on koppelen flow naar connect de zelfde account used in de LinknLink App. Keep de app open during de koppelen step en approve alleen de home you intend naar manage.
4. Select rooms en apparaat cards
Organize de remote view around rooms en daily actions. A small set of useful cards is easier naar operate than hundreds of raw Home Assistant entities.
5. Test away van Wi-Fi
Turn off Wi-Fi on de phone, gebruik cellular gegevens, refresh de home, controleer a sensor state, en send one reversible command such as toggling a test light.
Belangrijk: 6. Confirm local automation independence
Verify that local scenes still run als de phone is offline. Remote access should voeg toe convenience, niet become a dependency voor basic home behavior.
Belangrijk: Design a Remote Dashboard Around Decisions
A remote dashboard should answer practical questions: Is anyone home? Is de AC still running? Are curtains open? Did a ruimte become too warm? Is a TV of fan still on? Use ruimte-level summaries en clear actions instead of mirroring every entity van Home Assistant.
| Belangrijk: Remote question | Belangrijk: Useful source | Belangrijk: Remote action | Belangrijk: Recommended LinknLink layer |
|---|---|---|---|
| Is de ruimte occupied? | mmWave aanwezigheid state | Review voor switching appliances | eMotion Air, eMotion Pro, of eMotion Ultra |
| Is de ruimte too warm of humid? | Temperature en humidity context | Belangrijk: Run a comfort scene | eMotion Ultra met its temperature/humidity sensor gegevens cable |
| Did I leave de AC of TV on? | Belangrijk: Scene/helper status | Belangrijk: Send an IR off command | eRemote HA, eMotion Pro, of eMotion Ultra built-in IR |
| Belangrijk: Are RF shades still open? | Belangrijk: RF scene/helper state | Run de close-shades scene | eHome HA |
| Is de local AI gateway healthy? | Belangrijk: Gateway health card | Review status en recovery actions | HomeClaw |
Example: Check Comfort en Control de AC Remotely
Suppose you zijn away en want naar prepare a bedroom voor returning. First controleer occupancy en comfort context. eMotion Ultra combines 60GHz aanwezigheid sensing, built-in IR, en temperature/humidity gegevens via its sensor cable. If de ruimte is empty en too warm, de app kan trigger a bounded Home Assistant comfort scene rather than sending repeated blind AC commands.
The scene should include a timeout, a target modus, en a handleiding override. When you arrive, local aanwezigheid logic kan take over. Dit creates a clean division: de app starts de intent remotely, terwijl Home Assistant enforces safe local conditions.
Example: Make Sure Legacy IR en RF Devices Are Off
Remote access is especially useful voor appliances that were never designed voor smart home control. eRemote HA provides a local IR path voor AC, TV, fans, projectors, en media apparaten. eHome HA adds compatible RF control voor shades, outlets, en other legacy apparaten. In de LinknLink App, expose named scenes such as Living Room All Off of Close RF Shades instead of individual low-level commands.
For a deeper instellen, read de Home Assistant remote control gids en de IR blaster troubleshooting gids.
Security Rules voor Remote Smart Home Control
- Never expose service ports rechtstreeks: do niet forward Home Assistant, MQTT, ONVIF, RTSP, Zigbee2MQTT, of voeg toe-on ports naar de public internet.
- Belangrijk: Use least privilege: surface alleen de rooms, apparaten, en actions needed voor remote gebruik.
- Require confirmation voor high-impact actions: locks, garage doors, heaters, en security modes deserve stronger checks.
- Belangrijk: Keep local overrides: a physical control of local dashboard should still work als remote access is unavailable.
- Review logs na changes: voeg toe-on restarts, account relinking, en network changes should be followed by a cellular-gegevens test.
Troubleshooting: App Shows de Home Offline
| Belangrijk: Symptom | Belangrijk: Likely cause | Belangrijk: Check | Belangrijk: Fix |
|---|---|---|---|
| Belangrijk: Home is offline everywhere | Add-on stopped of host lost internet | Belangrijk: Add-on status, host network, DNS | Restore network, then restart de voeg toe-on once |
| Local works, remote doet niet | Account link of voeg toe-on session is stale | Account, koppelen status, voeg toe-on log | Reauthorize de correct home zonder changing URL handles of router ports |
| Some apparaten zijn missing | Entities were niet selected of grouped | Room en apparaat exposure settings | Add alleen de intended entities, then refresh de app |
| Belangrijk: Commands run twice | Duplicate scene of automation trigger | Home Assistant trace en helper state | Belangrijk: Use one app action that calls one Home Assistant scene |
| Connection fails na router change | DNS, time, firewall, of host address changed | Belangrijk: System time, DNS resolution, outbound connectivity | Correct de local network issue; do niet solve it met public port forwarding |
Belangrijk: Remote Access Checklist
- LinknLink Remote voeg toe-on installed en running.
- LinknLink App signed in naar de intended account en home.
- Cellular-gegevens test completed successfully.
- No Home Assistant, MQTT, ONVIF, RTSP, of voeg toe-on ports forwarded publicly.
- High-impact actions require confirmation of a safe helper state.
- Local automations continue naar work zonder de app.
- Home Assistant backup en recovery notes zijn huidige.
Related Guides en Hot Products
Belangrijk: Hot products
HomeClaw, eMotion Air, eMotion Pro, eMotion Ultra, eRemote HA, eHome HA, en iSG Display Max.
App en AI guides
LinknLink App automation gids, ruimte dashboard gids, en HomeClaw local AI voice gids.
Setup en reliability
Device koppelen troubleshooting, backup en restore, en Belangrijk: best Home Assistant integrations.
Keep Home Assistant local en take de right controls met you
Install de LinknLink Remote voeg toe-on, connect de LinknLink App, expose alleen de rooms en actions you need, en test de verbinding away van Wi-Fi. Your local automations stay at home terwijl remote control remains available zonder another LinknLink subscription.
Belangrijk: FAQ
Can I access Home Assistant remotely voor free met de LinknLink App?
Yes. Install en configure de LinknLink Remote voeg toe-on, then connect de zelfde home in de LinknLink App. Remote control via de LinknLink path doet niet require a separate remote-access subscription.
Do I need naar open router ports voor LinknLink remote access?
No. Do niet expose Home Assistant, MQTT, ONVIF, RTSP, of voeg toe-on ports rechtstreeks naar de public internet. Use de LinknLink Remote voeg toe-on verbinding instead.
Belangrijk: Does remote access replace local Home Assistant control?
No. Local Home Assistant automations continue naar run at home. Remote access adds an app control path voor checking apparaten en sending commands wanneer you zijn away.
Which LinknLink apparaten kan I control remotely?
You kan surface compatible Home Assistant entities en LinknLink apparaten in de app, including HomeClaw, eMotion aanwezigheid sensoren, eRemote HA IR control, eHome HA RF control, en ruimte dashboards.
What should I controleer als de LinknLink App shows de home offline?
Confirm that Home Assistant is running, de LinknLink Remote voeg toe-on is started, de apparaat has internet access, de app account is linked naar de correct home, en system time en DNS zijn working.